M62FG-SASM Gate Lock

(No reviews yet) Write a Review
$549.80
SKU:
M62-FG-SASM-KIT
Weight:
14.00 LBS
Shipping:
Calculated at Checkout

Product Overview

1200 lbs. Holding Force Gate Magnalock Kit

This 1200 lbs holding force face-mounted lock has a conduit fitting and shock absorbing strike mount. The strike control large amounts of impact from the strike and the Magnalock which then prolongs its lifespan. The Magnalock is weatherproof and is recommended for gates on fences, whether stand alone or as an electronically sliding. This is a complete kit for your gate needs.

 

 

%%Panel.ProductVideos%%
  • Tamperproof and Weatherproof
  • Automatic Dual Voltage
  • No Adjustment Necessary 
  • Stainless Steel Parts
  • Main Spring Provides 5/8" Impact Compression
  • 110 Lbs Resistance
  • Anti-Kickback Spring Provides 3/8" of rebound to return a gate to the normal position
  • Instant Release Circuit
  • 1200 Lbs
  • 250mA at 12VDC; 125mA at 24VDC current draws and voltage
  • Operable at -40 to +140F [-40 to +60C]
  • Securitron 1200 lbs Magnalock
  • 2000mA Power Supply
snfmksl-snfmksw.jpg

Flex Mount Gate Lock Brackets

Designed mounting brackets for use with the M62FG Magnalock and GL1 Gate lock for a professional looking and high security mounting platform.

Post Shim Brackets are used to adapt both small and large Post Brackets to pole/post sizes smaller than 2" or 3" respectively in 1/8" increments - 1-7/8", 1-3/4", 1-5/8" 2-7/8", 2-3/4", 2-5/8", etc.

  • Pre-configured kits include all lock mounting hardware and post shims
  • Post brackets are pre-drilled, lock and strike brackets are pre-tapped
  • 8" tall x 3/16" thick zinc-plated steel provides durability and long life
  • Lock and strike brackets are reversible doubling the mounting variations
  • Allows simple bolt on installation, or the entire system can be welded
  • Allows superior adjustabililty of lock and strike before final welding
  • Permits electronics to be mounted on either the fence post or gate post

OPTION NOTES:

  • FMK-SL will function with GL1 when post separation is between 1" and 3-3/4"
  • FMK-SL will function with M62FG when post separation is between 1" and 2-1/4" when using Shock Absorbing Strike Mount (SASM)
  • FMK-SL will function with M62FG when post separation is between 1" and 3-3/4" without SASM
  • FMK-SW will function with either M62FG or the GL1 where post separation is between 1" and 2-3/4"

Bracket Downloads:


Reviews

(No reviews yet) Write a Review