AL1012ULACM8

(No reviews yet) Write a Review
$589.35
Weight:
20.00 LBS
Altronix AL1012ULACM8 Power Supply

Product Overview

Altronix AL1012ULACM8 Power Supply

10Amp Access Control Power Supply with 16 Fused Outputs

Model AL1012ULXPD16 power supply/charger converts a 115VAC 60Hz input, 10 amp @ 12VDC distributed via sixteen (16) fuse protected non power limited outputs. Model AL1012ULXPD16CB is a PTC protected version of this unit.

  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/12AH batteries.
  • Dimensions 15.5"H x 12.25"W x 4.5"D (394mm H x 311mm W x 114mm D)
  • 1.125" and 1.375" combination knockouts.
%%Panel.ProductVideos%%
  • 12VDC output.
  • 10 amp of continuous supply current.
  • 115VAC 60Hz, 1.9 amp input.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
  • Built-in charger for sealed lead acid or gel type battery backup.
  • Maximum charge current .7 amp.
  • Zero voltage drop upon transfer to battery backup.
  • AC input and DC output LED indicators.
  • AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
  • Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).

Access Power Controller:

  • Eight (8) Access Control System outputs.
  • Eight (8) fuse protected Fail-Safe and/or Fail-Secure 12VDC power outputs
  • Any power output may be converted to dry form "C" relay output.
  • Eight (8) fuse protected 12VDC auxiliary power outputs (unswitched).
  • Red LEDs indicate outputs are triggered (relays energized).
  • Eight (8) Access Control System trigger inputs.
  • Eight (8) normally open (NO) inputs.
  • Eight (8) open collector inputs.
  • Any combination of the above.

Fire Alarm Disconnect:

  • Fire Alarm Disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
  • Normally open (NO) or normally closed (NC) dry contact input.
  • Polarity reversal input FACP signaling circuit.
  • Fire Alarm trigger LED indicates that the Fire Alarm Disconnect has been activated.
  • Fire Alarm output relay for triggering auxiliary reporting devices (form "C" contact rated @ 1 amp 28VDC).
  • Altronix 12VDC 10A Power Panel with 8 Fused Outputs
  • Fire Alarm Disconnect
  • Battery Charger and Gray Enclosure
  • (1) 12VDC / 12aH Batteries
  • Power Cable

Reviews

(No reviews yet) Write a Review