6062 Multi-function Timer

Multi Purpose Timer Relay Module

• 12VDC or 24VDC selectable operation
• Quick and extremely accurate time range adjustment from 1 sec. to 60 min.
• Form "C" relay contacts are 8 AMP at 120VAC/28VDC

Timer Module Information:

The Altronix 6062 Timer Module can be used for a wide variety of access control applications.  The timing ranges from 1 second to 60 minutes based on a potentiometer setting and "minute" or "second" dip switch setting.  Two new features have been added to the 6062 Timer Module.  First, you can now interupt and cancel a timing cycle and reset the timer if desired.  Adittionally the module can be configured to provide a momentary relay activation at the end of a desired timing cycle eliminating the need for using two basic timers (relays) to achieve this function.

• 12VDC or 24VDC selectable operation.
• Quick and extremely accurate time range adjustment from 1 sec. to 60 min.
• LED indicates relay is energized.
• Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
• Current Draw: Stand-by 3mA, Relay Energized 40mA.
• Triggers via positive DC (+) voltage, dry contact closure, or removal of contact closure.
• Selectable relay activation at the start or end of the timing cycle.
• One (1) second momentary relay activation at the end of the timing cycle (eliminates the need to use two (2) timers for this function).
• Built-in reset feature which cancels timing cycle.
• Repeat (pulser/flasher) mode.
• Snap Trac compatible (order Altronix model# ST3)
• DIN Rail Mount version available (order Altronix model# DTMR1).

Altronix 6062 Timer Module Datasheet (PDF)

Altronix 6062 Timer Module Installation Instructions (PDF)

• Altronix 6062 Timer Module
• Double Sided Foam Adhesive (2)
• Installation Instructions